Description
Rocky Mountain British, Roadsidewerx, and Old Jaguar are proud to offer this ZF6 to ZF8 Transmission Conversion Kit for Denso Powered Land Rover and Jaguars 2010-2013. This kit combined with the following parts list will help you swap the aging 6 speed for the more modern 8 speed. There are many benefits to an 8 speed conversion, increased fuel economy, no more large shifter, and an overall better driving experience.
Parts Included:
- Custom ZF8 Denso Flywheel
- ZF6 Male Connector Kit
- Remote Programing/Coding and Transmission Remap
- Wiring Diagram and Instructions
Parts that need to be sourced:
- ZF8 Transmission (Donor Vehicle 14-17 L319,L405,L494)
- ZF8 Wiring Harness Transmission to Body Harness 2014-2016 L319 (LR4)
- ZF8 Dial Shifter 2014-2016 Petrol or 12-13 Diesel
- 2014-2016 L319 (LR4) Center Console Harness (Need the Dial Shifter Wiring Pigtail)
- Shifter Surround Parts. Donors are as follows:
- L319 โ 2014-2016 LR4 NAS
- L320 – 2012 3.0l Diesel UK and Possibly other Markets
- Top Trim Panel LR029979
- Lower Shifter Bracket CH32-045D45-AA
- L322 โ 2012 TDV8 Diesel UK and Possibly other Markets
- Top Trim Panel LR024520
- Only if your current ATCM has a Dial – Late Style ATCM (Square Style with Buttons) Recommend sourcing 2013 L320 or 2014-2016 L319 (W/ Low Range) for NAS Vehicles. Also, if your vehicle has Adaptive Dampening will need to source one with adaptive dampening.
- Neutral Release Cable, you can grab this from your corresponding donor vehicle. We found that later vehicles, 2019-up RRS has and engine bay mounted one that fit nice and doesnโt require removal of center console panels to get to. This is not required to get vehicle working
- ZF6 Connector Sleeve TZV500010 (Used for Wiring if using our ZF6 Male Plug)
- 2014-up Non-Stop/Start Starter LR034028
- Paddle shifters must be from a 2010-2013 Denso Powered vehicle. Recommend getting the whole wheel.
Required Items for Programing:
- Windows 11 Laptop with Adequate Battery or Wall Charger
- JLR Mongoose Cable
- Battery Charger with Flash/Power Supply setting is Highly Recommended. Otherwise typically a fully charged Battery will do.
Please Note that we try to keep these kits in stock but can have a lead time. Typical lead time is around 2 weeks. Also note that we are offering a $50 core refund on Denso and Bosch Flywheels. So $100 if you have both to return to us.
Reviews
There are no reviews yet.